|
TALON-SET
Paasches senaste spruta för proffsbruk - The Talon. En Gravity feed spruta - toppmatad. Senaste tekniken där man lyssnat på användarnas önskemål gör detta till en verklig "high end" produkt. Komplett set med nål, munstycken, slang mm.
Kommer monterad med nål och munstycken TN-2, TA-2 och TT-2 (0.38mm). Man får även med nål och munstycken TN-3, TA-3, och TT-3 (0.66mm).
The newest addition to the Paasche Airbrush line is the gravity feed The Talon. The Talon was
designed to be our high end airbrush and will deliver the highest level of detail and control.
The trigger and air valve have been redesigned to allow for a smoother stroke as well as ease
of assembly and durability. The Talon is also 100% made in the USA at our Chicago plant.
TG Specifications:
• Dual Action
• Tip Size .38mm
• .4 Ounce Gravity Cup
• Hair Line to 1-1/2 Inches
• Crown Cap
• Cutaway Handle with Pre-set Needle Stop
• New Style Trigger and Piston
Working Pressures:
• Operating pressures 20-55 PSI; Maximum pressure 85 PSI
• 20-30 PSI is best for detail spraying w/ properly thinned paint
• Use the higher pressures for thicker material where fine detail is not critical or thin the paint to allow lower pressures.
Equipment Set-up:
The Airbrush is held in the same manner as a pen, with the index finger comfortably over the finger button.
1. Attach air hose to air supply and to airbrush. If using a regulator set pressure between 20 -55 PSI.
Airbrush Operation:
1. Press down on Finger Button to release air and pull back on button to control quantity of color.
2. To spray a fine line without heavy ends, start moving the airbrush without release of color. Then start the color at the beginning of line
and stop the color at the end, but continue the motion of the airbrush after the color has stopped.
3. Practice this movement until you can spray a fine line or a broad pattern without heavy build up at the beginning or end of your strokes.
4. Speed of movement controls density of color and fading effects at beginning and end of strokes.
5. For detail, hold the airbrush very close to the surface push down for air and pull back very slowly on the Finger Button to release a
small amount of paint.
6. For background work and broad effects, hold the airbrush away from the work surface and pull back on Finger Button to release
required amount of color.
7. For Stippling remove the aircap, push down on the trigger and pump the trigger forward and back. Adjust the air pressure between 15
and 50 PSI for desired stipple effect.
8. For more instruction see the “22 Airbrush Lessons for Beginners” booklet enclosed with your airbrush.
Size #1 Light Fluids-Spray Pattern 1/64\"- 1\" (0.55mm Tip opening)
Size #3 Medium Fluids-Spray Pattern 1/32\"- 1 1/4\" (0.73mm Tip opening)
Size #5 Heavy Fluids-Spray Pattern 1/16\"- 1 1/2\" (1.07mm Tip opening)
Paasches airbrushsprutor är av mycket hög kvalitet och mycket omtyckta bland både amatörer och yrkesfolk. Gedigen amerikansk kvalitet.
OBS KAN VARA NÅGOT LÄNGRE LEVERANSTID PÅ DENNA PRODUKT.
|
